Metal and Wood Paste Wax

Name: Metal and Wood Paste Wax
Brand: Element Hardware
SKU: EHPW
Availability: InStock

SKU EHPW

Price range: $8.00 through $34.00

Size

Color

Clear

Title	QTY	Discount
Bulk Discount	10 - 19	10% $7.20
Bulk Discount	20 - 49	15% $6.80
Bulk Discount	50 - 100	20% $6.40

Item Details

Our proprietary, hardening paste wax is made from top quality ingredients, is Zero VOC, and planet friendly. Easy to use on any raw wood or metal! Just apply a thin coat, let it sit for 30 minutes, and burnish to your desired gloss level. Apply multiple coats for pieces in high humidity or coastal environments.

This wax is used on all of our hand forged products, and is the top coat of our unique, hand finishes. This traditional finish not only enhances the depth and patina of the iron, but also provides a resilient barrier against the elements.

Most hardware companies today use synthetic sealants, plating, or paint, which can crack, chip, and wear, and can’t be refinished. You’ll be stuck buying new hardware before you know it. our wax finish is low-maintenance and easy to renew. With occasional touch-ups, your hardware will continue to age gracefully and perform beautifully for generations.

Dimensions & Installation

Mounting instructions and matching hardware are provided with your purchase. Cabinet hardware includes screws for ¾” thick mounting surfaces. Wall mount items come with 1.5” #8 wood screws. If you require different sizes please message us and we’ll adjust accordingly.

JIGS/TEMPLATES SHOULD NOT BE USED – DO NOT PRE DRILL YOUR CABINETS
PRE DRILLED CABINETS: if you have pre drilled cabinets please message us BEFORE ordering. Exact C2C measurements require an additional fee.
Installation Instructional Video: https://www.handforgedhomedecor.com/how-to-install-rear-mount-cabinet-pulls/

DIMENSIONS:
Hammered U Pulls – 1” clearance (room under pull) – 1 ⅜ to 1 ½ ” projection
Moonscape U Pulls – 1” clearance (room under pull) – 1 ⅜ to 1 ½ ” projection
Moonscape & Hammered Knobs – 1” projection
Wide U Pulls – 1/4X1” material – 1” clearance
Twig U Pulls – 1” clearance (room under pull) – 1 1/2” projection – ½” thick material
Rustic Pulls – 1-1 1/2” projection depending on length selected
Diamond Pulls – 1-1 1/2” projection depending on length selected
Barn Door Pulls – 6” Length – ⅛” X 1” material
Twist Pulls – 1-1 1/2” projection depending on length selected
L Knob – 1” projection – 1 ½” length – ½” thick material
Railroad Spike Pulls – ¾ -1” clearance – 1 ⅝” projection – 5 ½” Length
Railroad Spike Knobs – 1-1 ½” projection – 1 ¾” diameter
Railroad Spike Hooks Single Bend – 4” length – 1 ¾” projection – ⅝” thick
Railroad Spike Hooks Double Bend – 5” length – 1 ½ ” projection – ⅝” thick
Low Profile Towel Bar – 1 ½” projection – ⅛” thickness X 1” width
Standard Bath Towel Bar – 2.5” projection – ¼” thickness X 1” Width
Pot Rack – 1.5” projection – ⅛” thickness X 1” width
Pot Hook – 5” Length – ⅜” thick material – 2” projection
Finger Pulls Rear Mount – 1 ½ ” projection – ⅛” thick material
Rustic Toilet Paper Holder – ⅜” thick material – 2.5-3” clearance
Standard TP Holder -¼”X1” thick material – 2.5-3” clearance
Back Plates – 1 ½ ” square – ⅛” thick material
Curtain Rods – ⅝” thick material – Length based on Usable area, total length will be 5-10” longer than size selected.
Curtain Rod Brackets – ¾” X ⅛” material – 2 ½” projection
Mantle Hooks – 4X4” square X ¼” thick – 2 ½” hook

Items are hand made using traditional blacksmithing techniques, therefore no two are exactly the same. Small variations in dimensions and shape may be present in each piece. Items may vary from photos slightly. These variations only add to the unique beauty of each piece, and are a testament to their authenticity as hand forged items. All items are hand forged from solid iron. Custom material sizes available upon request.