Heirloom-Quality Finishes:
Using only the highest-quality products, our finishes are both beautiful and durable, letting the craftsmanship of our handwork shine while standing up to high-traffic, moisture-prone areas like baths and appliance pulls.
By combining zero-VOC undercoats with hardening wax, we create a richer, deeper finish than paint—one that can be reapplied at any time to restore its original luster. Unlike other coatings that chip or fade, this finish keeps surfaces looking their best. Tested hundreds of times over years, it’s proven to be the most durable and beautiful choice available.

Oil Blackened:
Satin black with light touches of grey, this finish allows the texture and forge work to come through. Our black oxide process penetrates into the metal, actually changing the color of the iron itself. This results in a deep, rich satin black that adds depth and character to the piece.

Brushed Steel:
This finish lies between a nickel/pewter hue with a satin sheen. It goes well with both modern and rustic decor. this is not a high shine, factory gloss kind of look. Some forge scale will be present which gives this finish a slightly antiqued/hand forged quality.

Brass Brushed:
This finish is achieved by heating the piece and hand brushing using a solid brass bristle brush. The brass integrates with the steel creating a very durable and amazingly beautiful darkened brass/bronze coloration. The brush strokes are visible, contributing a visual texture to this timeless look.

Care & Maintenance:
https://handforgedhomedecor.com/how-to-care-for-iron-hardware/

Mounting instructions:
Mounting instructions and matching hardware are provided with your purchase. Cabinet hardware includes screws for ¾” thick mounting surfaces. Wall mount items come with 1.5” #8 wood screws. If you require different sizes please message us and we’ll adjust accordingly.

PRE DRILLED CABINETS: if you have pre drilled cabinets please message us BEFORE ordering. Exact C2C measurements require an additional fee.

Installation Instructional Video:
https://handforgedhomedecor.com/how-to-install-rear-mount-cabinet-pulls/

Dimensions:
Hammered U Pulls – 1” clearance (room under pull) – 1 ⅜ to 1 ½ ” projection
Back Plates – 1 ½” square – ⅛” thick material
Curtain Rod Brackets – ¾” x ⅛” material – 2 ½” projection
Curtain Rods – ⅝” thick material – Length based on usable area; total length will be 5–10” longer than size selected
Diamond Pulls – 1–1 ½” projection depending on length selected
Dimpled Texture U Pulls – 1” clearance (room under pull) – 1 ¼” projection
Finger Pulls Rear Mount – 1 ½” projection – ⅛” thick material
Keychains – Type your inscription in the notes section at checkout – ⅛”–1.25” coin, 2” dog tag/bar
L Knob – 1” projection – 1 ½” length – ½” thick material
Low Profile Towel Bar – 1 ½” projection – ⅛” thickness x 1” width
Mantle Hooks – 4” x 4” square x ¼” thick – 2 ½” hook
Moonscape & Hammered Knobs – 1” projection
Moonscape U Pulls – 1” clearance (room under pull) – 1 ⅜” to 1 ½” projection
Pot Hook – 5” length – ⅜” thick material – 2” projection
Pot Rack – 1.5” projection – ⅛” thickness x 1” width
Railroad Spike Hooks Double Bend – 5” length – 1 ½” projection – ⅝” thick
Railroad Spike Hooks Single Bend – 4” length – 1 ¾” projection – ⅝” thick
Railroad Spike Knobs – 1–1 ½” projection – 1 ¾” diameter
Railroad Spike Pulls – ¾–1” clearance – 1 ⅝” projection – 5 ½” length
Rustic Pulls – 1–1 ½” projection depending on length selected
Rustic Toilet Paper Holder – ⅜” thick material – 2.5–3” clearance
Sphere Knobs – 1 3/16” diameter
Standard Bath Towel Bar – 2.5” projection – ¼” thickness x 1” width
Standard TP Holder – ¼” x 1” thick material – 2.5–3” clearance
Twig U Pulls – 1” clearance (room under pull) – 1 ½” projection – ½” thick material
Twist Pulls – 1–1 ½” projection depending on length selected
Wide U Pulls – ¼” x 1” material – 1” clearance

Disclaimer:

Items are hand made using traditional blacksmithing techniques, therefore no two are exactly the same. Small variations in dimensions and shape may be present in each piece. Items may vary from photos slightly. These variations only add to the unique beauty of each piece, and are a testament to their authenticity as hand forged items. All items are hand forged from solid iron. Custom material sizes available upon request.

Element Hardware is not responsible for damage to mounting surfaces for any reason.

Cabinet Hardware:

Mounting instructions and matching hardware are provided with your purchase. Cabinet hardware includes screws for ¾” thick mounting surfaces. Wall mount items come with 1.5” #8 wood screws. If you require different sizes please message us and we’ll adjust accordingly.

PRE DRILLED CABINETS: if you have pre drilled cabinets please message us BEFORE ordering. Exact C2C measurements require an additional fee.

Curtain Rods:

Element Hardware provides free quotes based solely on the following information: rod length, finish, and finial choice.

Determining factors such as total lengths, bracket/mounting locations, trim clearances, or installation layout are the responsibility of the client. Consultation on these factors is available at a rate of $125 per hour.

Element Hardware assumes no responsibility for incorrect measurements, mounting mismatches, or improper installations. All dimensions and installation details must be verified by the client prior to fabrication.

Rods exceeding 80″ in total length will be fabricated in two equal sections and joined at the midpoint. A center support bracket is required for structural stability, and an additional fee applies for this configuration. Maximum Rod Length is 170″

rustic hinge

Rustic Hammered Butt Hinge (Set of 2)